Furuno CH-250 Manuel d'utilisateur télécharger pdf (Page 15)

1-5

1.5 Adjusting Screen Brilliance, Panel Dimmer

Screen brilliance can be adjusted in nine steps and panel dimmer (backlighting) in four.

1. Press the [BRILL] key to open the dialog box for screen brilliance and panel dimmer. Do the

next step within four seconds, otherwise the dialog box will be erased.

DIMMER:3

BRILL:3

Figure 1-3 Brilliance, panel dimmer dialog box

2. Operate

or to adjust screen brilliance (0 is the lowest brilliance; 9 the highest). Note

that continuous pressing of the [BRILL] key also changes the brilliance level.

3. Operate

or to adjust the panel dimmer (0 is the lowest level; 4 is the highest).

4. Press the [MENU] key to register settings and close the dialog box. Note that the dialog box

is automatically erased if there is no control operation within about four seconds.

Note 1: The brilliance of a commercial monitor cannot be adjusted with the [BRILL] key. Use the

associated control on the monitor.

Note 2: For the supplied monitor unit, if you turn off the power with the brilliance set at minimum

the screen will show nothing at next power-up. In this case press the [BRILL] key

several times.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 117 118

Pas de commentaire

Furuno CH-250 Manuel d'utilisateur Page 15