Furuno CH-250 Manuel d'utilisateur télécharger pdf (Page 103)

6-1

6. MAINTENANCE,

TROUBLESHOOTING

This chapter provides information necessary for keeping the equipment in good working order.

WARNING

ELECTRICAL SHOCK HAZARD

Do not open the equipment.

Only qualified personnel

should work inside the

equipment.

6.1 Preventive Maintenance

Check the following points monthly.

• Check all cables. If damaged, replace.

• Check connectors at rear of each unit. Clean if necessary.

• Check earth of each unit. Clean if necessary.

• Check voltage of ship’s mains to be sure it is within the equipment’s power rating.

6.2 Cleaning the Equipment

Dust or dirt can be removed from the equipment with a soft, dry cloth. Do not use chemical

cleaners to clean the equipment – they can remove paint and markings. Wipe the LCD carefully

to prevent scratching, using tissue paper and an LCD cleaner. To remove stubborn dirt, use an

LCD cleaner, wiping slowly with tissue paper so as to dissolve the dirt. Change paper frequently

so the dirt will not scratch the LCD.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 117 118

Pas de commentaire

Furuno CH-250 Manuel d'utilisateur Page 103