Furuno NAVNET 1823C Manuel d'utilisateur

MODEL 1823C MARINE RADARMODEL 1833C MARINE RADARMODEL 1933C MARINE RADARMODEL 1943C MARINE RADARMODEL 1953C MARINE RADARCOLOR VIDEO PLOTTER GD-1900C B

viii 6. DATA TRANSFER...6-1 6.1 Memory Card Operations ...

3. PLOTTER OPERATION 3-143.5.4 C-MAP charts Cursor and data display Besides its fundamental functions of providing position data, the cursor can al

3. PLOTTER OPERATION 3-15Icon data You may place the cursor on any icon to find information about the selected icon. 1. For example, place the cu

3. PLOTTER OPERATION 3-16Color whiteHeight 7. 00 MetersLight characteristic occultingXXXXXXXXXXXXXXXXNavigation mark, fixed Light. S

3. PLOTTER OPERATION 3-17 34 24. 3456 N 359.9 NU124 24. 3456 W 59.9kt 024nm+Time: 04:35Height: 0.45ftDraught: 0.65ft28/10/98 -05 43°

3. PLOTTER OPERATION 3-183.6 Working with Track Your ship’s track is plotted on the screen using navigation data fed from position-fixing equipment

3. PLOTTER OPERATION 3-19Target track Target track, NMEA format TTM (Tracked Target Message) data sentence, may be turned on or off as desired. The

3. PLOTTER OPERATION 3-203.6.3 Changing track color Track can be displayed in red (default setting), yellow, green, light-blue, purple, blue and w

3. PLOTTER OPERATION 3-213.6.4 Track plotting method and interval for own ship track In drawing the own ship track, first the ship’s position fed

3. PLOTTER OPERATION 3-224. Use the trackball to select digit and enter value with the alphanumeric keys. The CLEAR soft key functions to clear an

3. PLOTTER OPERATION 3-233.6.6 Erasing track This paragraph shows you how to erase own ship’s track and target tracks. You can erase ship’s track t

ixFOREWORD A Word to the Owner of the Model 1800C/1900C Series Marine Radar, GD-1900C Color Video Plotter FURUNO Electric Company thanks you for pur

3. PLOTTER OPERATION 3-24Erasing own ship track by color You may erase own ship’s track by color as follows: 1. Press the [MENU] key followed by

3. PLOTTER OPERATION 3-253.7 Marks, Lines Marks are useful for denoting important points such as a good fishing spot. Marks can be inscribed in sev

3. PLOTTER OPERATION 3-26MARKS SHAPE▲▼✕ Marks shape window 7. Use the trackball to select mark shape desired, then press the ENTER soft key. 8. S

3. PLOTTER OPERATION 3-273. Use the trackball to select line style desired, then press the ENTER soft key. The line style “dot” disables line dr

3. PLOTTER OPERATION 3-283.8 Waypoints In navigation terminology, a waypoint is a particular location on a voyage whether it be a starting, interme

3. PLOTTER OPERATION 3-296. Press the SELECT MARK soft key. 7. Press the MARK SHAPE soft key to open the mark shape selection window. SELECT MARK

3. PLOTTER OPERATION 3-30Entering a waypoint by range and bearing This method is useful when you want to enter a waypoint using range and bearing t

3. PLOTTER OPERATION 3-31Entering a waypoint from the waypoint list You can manually enter waypoint position from the waypoint list as follows: 1.

3. PLOTTER OPERATION 3-32Editing a waypoint from the plotter display You may edit waypoints from the plotter display as follows: 1. Press the [ME

3. PLOTTER OPERATION 3-333.8.3 Erasing waypoints Erasing a waypoint directly from the plotter display 1. Operate the trackball to place the cursor

xFeatures The 1800C/1900C series of radars and video plotters work within our new product-network system called the “NavNet.” Each product has an IP

3. PLOTTER OPERATION 3-343.8.4 Changing waypoint mark size (FURUNO, NavCharts™) You may change the size of all waypoint marks to small or large

3. PLOTTER OPERATION 3-353.8.5 Searching waypoints You can search for a waypoint through the alphanumeric waypoint list as follows: 1. Press the

3. PLOTTER OPERATION 3-363.9 Routes Often a trip from one place to another involves several course changes, requiring a series of route points (way

3. PLOTTER OPERATION 3-374. Press the NEW ROUTE soft key to open the new route entry screen. NEWROUTEPLOTLOCAL LISTALPHA LISTCONECTCANCE

3. PLOTTER OPERATION 3-38Creating voyage-based routes You can create routes based on your ship’s track. The route can be created automatically by t

3. PLOTTER OPERATION 3-396. Choose how to record points for your route, by time, by range or manual entry, by pressing BCKTRK TIME, BCKTRK RANGE o

3. PLOTTER OPERATION 3-403.9.2 Connecting routes Two routes which you have created can be connected as follows to form a new route. 1. Press the

3. PLOTTER OPERATION 3-413.9.3 Inserting waypoints Waypoints can be inserted in a route as follows: Inserting a waypoint from the route list 1.

3. PLOTTER OPERATION 3-429. Use the trackball to select the waypoint you want to insert. (You can switch between the local list and alphanumeric l

3. PLOTTER OPERATION 3-433.9.4 Removing waypoints from a route Removing a waypoint from the route list 1. Press the [MENU] key to open the menu.

xiSYSTEM CONFIGURATIONS All NavNet products incorporate a “network circuit board” to integrate each NavNet product on board through an optional LAN

3. PLOTTER OPERATION 3-443.10 Navigation This section shows you how to get to a desired destination by “quick points,” waypoints, port services and

3. PLOTTER OPERATION 3-45Navigating to multiple quick points 1. Select “35 POINTS” following the procedure in “Selecting quick point entry method”

3. PLOTTER OPERATION 3-46Selecting an external waypoint You can select a waypoint (or route) entered at an external plotter connected with NMEA cab

3. PLOTTER OPERATION 3-47▼PORT & SERVICESELECT PORT & SRVC ACCIAROLIACQUAMORTAAGNONE S. NICOLAAGROPOLIAMALFIBAIACAPRICASA MICCIOLA-ISCHIA

3. PLOTTER OPERATION 3-483.10.4 Following a route Selecting the route to follow 1. Press the [MENU] key to open the menu. 2. Press the WAYPOINTS

3. PLOTTER OPERATION 3-49Restarting navigation When you steer to avoid an obstacle or the vessel drifts, you may go off your intended course, as in

3. PLOTTER OPERATION 3-50Setting speed for ETA calculation Speed, which may be input manually or automatically, is required to calculate ETA (Estim

3. PLOTTER OPERATION 3-51To select waypoint switching method do the following: 1. Press the [MENU] key. 2. Press the PLOTTER SETUP soft key. 3.

3. PLOTTER OPERATION 3-523.11 Alarms The plotter section has eight conditions which generate both audio and visual alarms: arrival alarm, anchor wa

3. PLOTTER OPERATION 3-533.11.2 Arrival alarm The arrival alarm informs you that your boat is approaching a destination waypoint. The area that def

xiiSingle-unit NavNet system (GD-1900C) Network SounderETR-6/10NETR-30NGPS receiverGP-310B/320B12 - 24 VDCOther NavNet Unit(Model 1833C, etc.)Display

3. PLOTTER OPERATION 3-543.11.3 Anchor watch alarm The anchor watch alarm informs you that your boat is moving when it should be at rest. When the

3. PLOTTER OPERATION 3-553.11.4 XTE (Cross-Track Error) alarm The XTE alarm warns you when your boat is off its intended course. When the XTE alar

3. PLOTTER OPERATION 3-564. Use the trackball to select WITHIN, UNDER/OVER, or OFF as appropriate 5. For WITHIN and UNDER/OVER use the trackball

3. PLOTTER OPERATION 3-573.11.7 Trip alarm The trip alarm informs you when you have traveled a certain distance. 1. Press the [ALARM] key to open

3. PLOTTER OPERATION 3-583.11.8 Alarm information When an alarm setting has been violated, the buzzer sounds and the speaker icon appears and is re

3. PLOTTER OPERATION 3-59Alarm messages The table below shows the plotter alarm messages and their meanings. Plotter alarm messages and their meani

3. PLOTTER OPERATION 3-603.12 Resetting Trip Distance Trip distance is shown on the navigation data display. You can reset the trip distance to ze

4-14. VIDEO SOUNDER OPERATION With connection of the optional Network Sounder ETR-6/10N/30N you can show video sounder images on the display. 4.1

4. VIDEO SOUNDER OPERATION 4-24.2 Sounder Displays 4.2.1 Selecting a sounder display There are seven display modes from which to choose: dual freq

4. VIDEO SOUNDER OPERATION 4-34.2.2 Description of sounder displays Single-frequency display Color barSoft keysVariable Range Marker(White)Depth s

xiiiTwo-unit NavNet system Radar Antenna UnitORGPS Receiver GP-310B/320BRadar, plotter dataRadar, plotter dataRadar Antenna UnitORGPS Receiver GP-31

4. VIDEO SOUNDER OPERATION 4-4Dual-frequency display The dual-frequency display provides both LF and HF pictures. This display is useful for compar

4. VIDEO SOUNDER OPERATION 4-5 Marker-zoom display plus normal sounder display Bottom-zoom display The bottom-zoom display expands bottom and botto

4. VIDEO SOUNDER OPERATION 4-6Bottom-lock display The bottom-lock display provides a compressed normal picture on the right half of the screen and

4. VIDEO SOUNDER OPERATION 4-7Bottom discrimination display The bottom discrimination mode displays the bottom echo to help you determine bottom ha

4. VIDEO SOUNDER OPERATION 4-8 4.2.3 Selecting screen split method in combination displays On combination sounder displays you can split the sc

4. VIDEO SOUNDER OPERATION 4-94.3 Automatic Sounder Operation Automatic sounder operation is useful when you are preoccupied with other tasks and

4. VIDEO SOUNDER OPERATION 4-104.4 Manual Sounder Operation Manual operation is useful for observing fish schools and bottom using a fixed gain se

4. VIDEO SOUNDER OPERATION 4-11Press the [GAIN] key to show the gain window, and adjust the [ENTER] knob or trackball. Current level is shown on th

4. VIDEO SOUNDER OPERATION 4-124.5 Measuring Depth, Time The VRM measures the depth and the cross-hair cursor, time. 1. Rotate the [ENTER] knob

4. VIDEO SOUNDER OPERATION 4-134.6 Reducing Interference Interference from other acoustic equipment operating nearby or other electronic equipment

xivWHAT IS WAAS? WAAS, available in North America, is a provider in the worldwide SBAS (Satellite Based Augmentation System) navigation system. SBAS

4. VIDEO SOUNDER OPERATION 4-144.7 Reducing Low Level Noise Light-blue dots may appear over most of the screen. This is mainly due to sediment in

4. VIDEO SOUNDER OPERATION 4-154.8 Erasing Weak Echoes Sediments in the water or reflections from plankton may be painted on the display in green o

4. VIDEO SOUNDER OPERATION 4-164.9 White Marker The white marker functions to display a particular echo color in white. For example, you may want t

4. VIDEO SOUNDER OPERATION 4-174.10 Picture Advance Speed The picture advance speed determines how quickly the vertical scan lines run across the s

4. VIDEO SOUNDER OPERATION 4-184.10.2 Advancement synchronized with ship’s speed With speed data provided by a speed-measuring device, picture adv

4. VIDEO SOUNDER OPERATION 4-194.11 Display Colors You can select the number of colors and background color to display as follows: 1. Press the [

4. VIDEO SOUNDER OPERATION 4-204.12 Alarms The sounder section has five conditions which generate audio and visual alarms: bottom alarm, fish alarm

4. VIDEO SOUNDER OPERATION 4-214.12.2 Bottom alarm The bottom alarm sounds when the bottom echo is within the alarm range set. To activate the bott

4. VIDEO SOUNDER OPERATION 4-224.12.4 Fish alarm (B/L) The bottom-lock fish alarm sounds when a fish echo is within a predetermined distance from

4. VIDEO SOUNDER OPERATION 4-234.12.5 Water temperature alarm There are two types of water temperature alarms: WITHIN RANGE and OUT OF RANGE. The

1-11. OPERATIONAL OVERVIEW This chapter provides the basic information needed to get you started using your radar, video plotter. The following topi

4. VIDEO SOUNDER OPERATION 4-244.12.6 When an alarm setting is violated... When an alarm setting has been violated the buzzer sounds and the speak

4. VIDEO SOUNDER OPERATION 4-25Alarm messages The table below shows the sounder alarm messages and their meanings. Sounder alarm messages and their

4. VIDEO SOUNDER OPERATION 4-264.14 Changing Pulse Repetition Rate Pulse repetition rate can be changed. Normally, the highest rate (20) is used.

4. VIDEO SOUNDER OPERATION 4-274.15 Interpreting the Sounder Display 4.15.1 Zero line The zero line (sometimes referred to as the transmission lin

4. VIDEO SOUNDER OPERATION 4-284.15.3 Fish school echoes Fish school echoes will generally be plotted between the zero line and the bottom. Usuall

5-15. CUSTOMIZING YOUR UNIT This chapter describes the various options which allow you to set up your unit to suit your needs. For mode-specific men

5. CUSTOMIZING YOUR UNIT 5-2 Contents of general setup menu Item Description Settings Key Beep Turns key beep on/off. On, Off Language Chooses me

5. CUSTOMIZING YOUR UNIT 5-3Contents of general setup menu (con’t from previous page) Item Description Settings Bearing Readout Chooses bearing di

5. CUSTOMIZING YOUR UNIT 5-4Contents of radar display setup menu Item Description Settings EBL Reference References EBL bearing, shown in the EBL da

5. CUSTOMIZING YOUR UNIT 5-5Contents of radar display setup menu (con’t from previous page) Item Description Settings Background Color Chooses co

1. OPERATIONAL OVERVIEW 1-2 1.1 Operating Controls 1.1.1 Display unit controls Overview of display unit controls The radar, video plotter, sounder

5. CUSTOMIZING YOUR UNIT 5-65.2.2 Radar range setup You may choose the radar ranges you wish to use, from the RADAR RANGE SETUP menu. After choosing

5. CUSTOMIZING YOUR UNIT 5-75.2.3 Function key setup The function keys provide one-touch execution of a desired function. The default radar functi

5. CUSTOMIZING YOUR UNIT 5-8 4. Select function desired with the trackball, then press the ENTER soft key or [ENTER] knob to register your selection

5. CUSTOMIZING YOUR UNIT 5-95.3 Plotter Setup This paragraph provides the information necessary for setting up the plotter display. 5.3.1 Navigat

5. CUSTOMIZING YOUR UNIT 5-105.3.2 Function key setup The function keys provide one-touch execution of a desired function. The default plotter fun

5. CUSTOMIZING YOUR UNIT 5-114. Select function desired with the trackball, then press the ENTER soft key or [ENTER] knob to register your selecti

5. CUSTOMIZING YOUR UNIT 5-125.4 Chart Setup This paragraph shows you how to setup digital charts, from offsetting chart position to turning chart at

5. CUSTOMIZING YOUR UNIT 5-135.4.2 FURUNO, NavCharts™ chart attributes FURUNO, NavCharts™ chart attributes may be turned on or off from the CHART D

5. CUSTOMIZING YOUR UNIT 5-14Contents of chart details menu (FURUNO, NavCharts™) Item Description Settings Lat/Lon Grid Latitude and longitude grid

5. CUSTOMIZING YOUR UNIT 5-15CNTOUR LINE soft key 1. Press the [MENU] key. 2. Press the CHART SETUP and CHART DETAILS soft keys. 3. Press the CN

1. OPERATIONAL OVERVIEW 1-3Soft keys The function of the five soft keys changes according to the operation. Their labels for their current function

5. CUSTOMIZING YOUR UNIT 5-16Contents of chart details menu (C-MAP) Item Description Settings Waypoint Waypoint display Plotter/Overlay, Plotter,

5. CUSTOMIZING YOUR UNIT 5-17Contents of chart details menu for C-MAP (con’t from previous page) Item Description Settings Bathymetric Line Plott

5. CUSTOMIZING YOUR UNIT 5-185.5 Data Boxes Setup You may select the data to show in the data boxes for the plotter, radar and sounder displays. Six

5. CUSTOMIZING YOUR UNIT 5-195.6 Hot Page Setup Six user-arrangeable hot pages are provided for quick selection of desired display. If the default

5. CUSTOMIZING YOUR UNIT 5-204. Rotate the [ENTER] knob to select a main screen, then press the [ENTER] knob. For example, select the radar display.

5. CUSTOMIZING YOUR UNIT 5-21NAVSETUPEDITRETURN* For GPS receiver other than GP-310B/320B.POSITION SOURCE ALLSPEED AVERAGING* 0060second(s)LOCAL

5. CUSTOMIZING YOUR UNIT 5-225.7.2 GPS receiver setup (Set equipped with GP-310B/320B) The GPS SETUP menu sets up the GPS Receiver GPS-310B/320B. Pr

5. CUSTOMIZING YOUR UNIT 5-23Contents of GPS setup menu (con’t from previous page) Item Description Settings Position Smoothing When the DOP or r

5. CUSTOMIZING YOUR UNIT 5-24Contents of GPS setup menu (con’t from previous page) Item Description Settings Disable Satellite Every GPS satellite i

5. CUSTOMIZING YOUR UNIT 5-25WAAS SETUP Press the WAAS SETUP soft key to show the WAAS SETUP display. Note: This function requires GP-320B antenna.

The paper used in this manualis elemental chlorine free. Your Local Agent/Dealer Your Local Agent/Dealer9-52 Ashihara-cho,9-52 Ashihara-cho,Nishinomiy

1. OPERATIONAL OVERVIEW 1-41.1.2 Remote controller Operating distance90°: Up to 5 m±45°: Up to 3 mReplace the batteries (AA) when the distance from

5. CUSTOMIZING YOUR UNIT 5-265.7.3 TD display setup The TD SETUP menu sets which Loran C or Decca chain to use to display TD position. (Connection o

5. CUSTOMIZING YOUR UNIT 5-276. If necessary, you may enter a position offset to refine Loran C position accuracy. Select (GRI) CORRECTION 1 or CO

5. CUSTOMIZING YOUR UNIT 5-285.8 Nav Data Display Setup The nav data display shows various navigation data, fed from a navigator, network equipment,

5. CUSTOMIZING YOUR UNIT 5-295.9 Sounder Setup This section shows you how to customize your network sounder to your liking. You can set fish alarm

5. CUSTOMIZING YOUR UNIT 5-30Sounder system setup menu description (con’t from previous page) Item Description Settings Echo Offset (HF, LF) If th

5. CUSTOMIZING YOUR UNIT 5-315.9.2 Sensor setup The SENSOR SETUP menu lets you further refine speed, water temperature and depth data fed from the

5. CUSTOMIZING YOUR UNIT 5-325.9.3 Sounding range, zoom range, bottom lock range This paragraph shows you how to set custom ranges for basic range,

5. CUSTOMIZING YOUR UNIT 5-335.9.4 Function key setup The function keys provide one-touch execution of a desired function. The default sounder fun

5. CUSTOMIZING YOUR UNIT 5-345. Select function desired with the trackball, then press the ENTER soft key or [ENTER] knob to register your selection

6. DATA TRANSFER 6-16. DATA TRANSFER This chapter provides information for saving and replaying data to and from memory cards, uploading and download

1. OPERATIONAL OVERVIEW 1-51.2 Inserting a Chart Card Your unit reads FURUNO and Nav-Charts™ (NAVIONICS) chart cards, or C-MAP chart cards, depend

6. DATA TRANSFER 6-26.1.2 Saving data to a memory card 1. Insert a formatted memory card into the slot. 2. Press the [MENU] key followed by the

6. DATA TRANSFER 6-3Memory card messages Various memory card messages appear to alert you to memory card-related error. These are tabulated below.

6. DATA TRANSFER 6-46.1.3 Playing back data from a memory card Data (track, marks, lines, waypoints, routes and setting data) can be loaded from a

6. DATA TRANSFER 6-56.2 Uploading, Downloading Data You can upload/download waypoints, routes, marks and lines from/to a PC, through the DATA 4 po

6. DATA TRANSFER 6-67. To change the baud rate, press the SELECT BPS soft key. BAUD RATE▲▼4800 bps9600 bps19200 bps Baud rate window 8. Select

6. DATA TRANSFER 6-7Route data menu $GPRTE, x, x, a, ccc, c----c, c----c, ... , c----c <CR><LF>12345612 Route data format 1:

6. DATA TRANSFER 6-86.3 Loading Waypoint Data from Yeoman Waypoint data can be loaded from a Yeoman to this equipment. Connect the Yeoman to a DAT

6. DATA TRANSFER 6-96.4 Receiving Data Via Network Equipment You can receive waypoints, routes, marks and lines from NavNet equipment. 1. Press

6. DATA TRANSFER 6-1010. Press the RCV soft key followed by the [ENTER] knob. The message “START RECEIVING DATA VIA NETWORK.” is displayed. If no d

7-17. MAINTENANCE, TROUBLESHOOTING This chapter provides information necessary for keeping your unit in good working order and remedying simple prob

1. OPERATIONAL OVERVIEW 1-6 1.3 Turning the Unit On/Off Press the [POWER/BRILL] key to turn the unit on. A beep sounds and the equipment proceeds

7. MAINTENANCE, TROUBLESHOOTING 7-2 7.2 Replacement of Batteries Battery on circuit board A lithium battery (Type CR2450-F2 ST2L, Code No. 000-144-

7. MAINTENANCE, TROUBLESHOOTING 7-37.4 Replacement the Magnetron When the magnetron has expired, distant targets cannot be seen on the display. Wh

7. MAINTENANCE, TROUBLESHOOTING 7-4 7.7 Simple Troubleshooting This section provides simple troubleshooting procedures which the user can follow to r

7. MAINTENANCE, TROUBLESHOOTING 7-57.7.3 Plotter Requires GPS Receiver GP-310B. Plotter troubleshooting If… Then… position is not fixed within thre

7. MAINTENANCE, TROUBLESHOOTING 7-6 7.7.4 Sounder Requires Network Sounder ETR-6/10N/30N. Sounder troubleshooting If… But… Then… you selected a soun

7. MAINTENANCE, TROUBLESHOOTING 7-77.8 Diagnostics This paragraph provides the procedures for testing the equipment for proper operation. Four test

7. MAINTENANCE, TROUBLESHOOTING 7-8 Display unit test Press the DISPLAY UNIT TEST soft key at the MEMORY I/O TEST menu to test the display unit. The

7. MAINTENANCE, TROUBLESHOOTING 7-9Network sounder test (Requires Network Sounder ETR-6/10N, ETR-30N) Press the NETWORK SOUNDER TEST soft key at th

7. MAINTENANCE, TROUBLESHOOTING 7-10 7.8.2 Test pattern The test pattern test checks the display for proper display of colors. 1. Press the [MENU

7. MAINTENANCE, TROUBLESHOOTING 7-117.8.3 Keyboard, remote controller test The keyboard test checks the controls on the display unit and remote co

1. OPERATIONAL OVERVIEW 1-71.4 Display Brilliance, Panel Brilliance, Hue You can adjust display brilliance, panel brilliance and hue as shown belo

7. MAINTENANCE, TROUBLESHOOTING 7-12 7.9 GPS Status Display The GPS status display provides data about the GPS satellites. It is available with conn

7. MAINTENANCE, TROUBLESHOOTING 7-137.10 Clearing Memories Your equipment has a memory for each of the plotter, radar and sounder sections. These m

7. MAINTENANCE, TROUBLESHOOTING 7-14 7.11 Error Messages In addition to alarm messages your equipment also displays error messages. Error messag

A-1APPENDIX Menu Overview MENU key Radar MENU KeyEBL REFERENCE (TRUE, RELATIVE)CURSOR POSITION (LAT/LON, TD, RNG&BRG-REL, RNG&BRG-TRUE)TUNIN

APPENDIX A-2 GENERALSETUPNAV SOURCESETTINGSNAV OPTIONSYSTEM CONFIGURATIONPOSITION SOURCE(FURUNO BB GPS, GP, LC, ALL)SPEED AVERAGING (0-9999 second

APPENDIX A-3PORT SETUP24SYSTEMSETUP3SELECT SNTNC soft key*GPS/NMEA PORT FURUNO GPS SENSOR (YES, NO)OUTPUT FORMAT (NMEA 0183 Ver.1.5, 2.0)LAT/LON F

APPENDIX A-4 * = Requires GPS Receiver GP-310B.** = Requires Network Sounder ETR-6/10N.*** = Requires ARP-equipped Model 1800/1900 series network r

APPENDIX A-5 Plotter MARKS/LINES COLOR (RED, YELLOW, GREEN, LIGHT BLUE, PURPLE, BLUE, WHITE)MARKS SHAPE ( )LINES STYLE (

APPENDIX A-6 WAYPOINT (PLOTTER/OVERLAY, PLOTTER, OFF)WAYPOINT NAME (PLOTTER/OVERLAY, PLOTTER, OFF)LAT/LON GRID (PLOTTER/OVERLAY, PLOTTER, OFF)CHART

APPENDIX A-7 SYSTEM CONFIGURATION (Same items as on page A-2.) CREATE VOYAGE- BASED ROUTESOFT KEY 1 - SOFT KEY 5(OFF, ADD NEW WPT, MOVE WPT, RUL

1. OPERATIONAL OVERVIEW 1-8 1.4.2 Hue You may select the colors for the radar, plotter and overlay displays as below. 1. Press the [POWER/BRIL

APPENDIX A-8 Sounder MENU KeyNOISE LIMITER (OFF, LOW, MEDIUM, HIGH)CLUTTER (0-16, 05 AUTO)WHITE MARKER (1-8 (8-color), 1-16 (16 color), OFF)ZOOM MA

APPENDIX A-9 EXT VIDEO (Same items as on page A-2.)MENU Key CONFIGURATION ALARM key Radar Alarms SET GUARD 1 (ERASE GUARD 1)SET GUARD 2 (ERASE GUAR

APPENDIX A-10 Geodetic Chart List 001: WGS84 002: WGS72 003: TOKYO : Mean Value (Japan, Korea, and Okinawa) 004: NORTH AMERICAN 1927 : Mean Value (

APPENDIX A-11World Time Chart

APPENDIX A-12 Icons Icon Meaning North marker. Points to North. Correct chart and suitable scale - full chart reliability. Chart overenlarged.

SP - 1 E3503S02J-M 03/09/24 SPECIFICATIONS OF MARINE RADAR MODEL 1800C/1900C SERIES 1 GENERAL 1.1 Indication System PPI Daylight display, raste

SP - 2 E3503S02J-M 03/09/24 2.3.1 Radiator Slotted waveguide array 2.3.2 Polarization Horizontal 2.3.3 Antenna Rotation 24 or 48 rpm nominal

SP - 3 E3503S02J-M 03/09/24 3.5 Tuning Automatic or manual 3.6 Receiver Front End MIC (Microwave IC) 3.7 Bandwidth Tx pulselength 0.08 µs an

SP - 4 E3503S02J-M 03/09/24 NMEA 0183 Ver1.5 GGA, GLL, RMA, RMC, GTD, VTG, ZDA (GPS data required) RMB, WPL, BWC or BWR, APB, AAM, BOD, XTE, VH

SP - 5 E3503S02H-M 7 ENVIRONMENTAL CONDITION 7.1 Ambient Temperature Antenna Unit: -25°C to +70°C Display Unit: -15°C to +55°C Remote Contr

1. OPERATIONAL OVERVIEW 1-91.5 Selecting a Display 1.5.1 Display modes If you have a radar, navigator, network sounder and external video source (

SP - 6 E3503S02H-M SPECIFICATIONS OF VIDEO PLOTTER GD-1900C 1 DISPLAY UNIT 1.1 Indication System PPI Daylight display, raster scan, color LCD

SP - 7 E3503S02H-M alarms, Ship’s speed in and out alarms, Water temperature, Trip alarm, Fish alarm, Bottom alarm (ETR required) 3 POWER

This page is intentionally left blank.

Index-1INDEXA A/C RAIN...2-5 A/C SEA ...2-4 A

INDEX Index-2 Colors radar display ...5-5 radar echoes...5-5 s

INDEX Index-3HIWAY CNTRL soft key...3-5 HL OFF soft key...2-16 Hot page setup

INDEX Index-4 Port, port services icons...3-13 navigating to ...

INDEX Index-5Track displaying other targets'...3-19 displaying own ship's...3-18 eras

1. OPERATIONAL OVERVIEW 1-10 1.5.2 Selecting a display 1. Press the [DISP] key to show the display selection window. The icons of modes not avail

1. OPERATIONAL OVERVIEW 1-111.5.3 Switching control in combination and overlay screens A soft key is provided in relevant combination and overlay

1. OPERATIONAL OVERVIEW 1-121.5.4 Selecting image source When more than one network radar or network sounder is connected to the equipment, you ma

1. OPERATIONAL OVERVIEW 1-131.6 Trackball, Cursor The trackball functions to shift the cursor, for measurement of range and bearing to a location (

iSAFETY INSTRUCTIONSWARNINGWARNINGELECTRICAL SHOCK HAZARDDo not open the equipment.Only qualified personnelshould work inside theequipment.Turn off

1. OPERATIONAL OVERVIEW 1-14 1.7 Entering the MOB Mark, Setting MOB as Destination The MOB (Man Overboard) mark functions to mark man overboard po

1. OPERATIONAL OVERVIEW 1-151.8 Data Boxes Data boxes, providing navigation data, may be shown on any full-screen display. Up to six data boxes (tw

1. OPERATIONAL OVERVIEW 1-161.8.2 Rearranging data boxes You may select the location for data boxes as follows: 1. Using the trackball, place the

1. OPERATIONAL OVERVIEW 1-171.9 Function Keys The function keys provide for one-touch execution of a desired function. The default function key set

1. OPERATIONAL OVERVIEW 1-182. Press function key desired. Note: Function keys can be individually programmed for the plotter, radar and sounder

1. OPERATIONAL OVERVIEW 1-19Radar NavNet display unit-generated echoes 1. Select RADAR, then press the EDIT soft key. RADAR▲SIMULATION 1SIMULATION

1. OPERATIONAL OVERVIEW 1-2011. Enter longitude (setting range, 180°E-180°W, default setting, 125°00.000’W), then push the [ENTER] knob. 12. Select

2-12. RADAR OPERATION This chapter covers radar operation, including the ARP (Auto Plotter) function. ARP requires a Model 1800/1900 series network

2. RADAR OPERATION 2-22.2 Transmitting, Stand-by 1. Confirm that the network radar is plugged in. 2. Press the [DISP] key to select a radar displ

2. RADAR OPERATION 2-31. Press the [GAIN] key to show the “gain adjustment” soft keys, and the last-used adjustment window appears. The example be

iiCOMPLIANCE WITH R&TTE DIRECTIVE 1999/5/EC This radar complies with the R&TTE Directive 1999/5/EC. In accordance with Article 6-3 of this

2. RADAR OPERATION 2-42.5 Reducing Sea Clutter 2.5.1 How the A/C SEA works Echoes from waves can be troublesome, covering the central part of the

2. RADAR OPERATION 2-55. When the radar source is the Model 1800/1900 series, A/C SEA and A/C RAIN can be automatically adjusted. Press the A/C AT

2. RADAR OPERATION 2-62.7 Range Scale The range setting determines the size of the area (in nautical miles) that will appear on your display. In ad

2. RADAR OPERATION 2-72.8 Pulselength The pulselength in use is displayed at the upper left corner of the display. Appropriate pulselengths are pre

2. RADAR OPERATION 2-82.9 Presentation Mode This unit provides four radar presentation modes: head-up, course-up, north-up and true motion. Headin

2. RADAR OPERATION 2-92.9.2 Description of presentation modes Head-up A display without azimuth stabilization in which the line connecting the cen

2. RADAR OPERATION 2-10North-up In the north-up mode, targets are painted at their measured distances and in their true (compass) directions from

2. RADAR OPERATION 2-112.10 Measuring the Range You can measure the range to a radar target three ways: by the range rings, by the cursor, and by

2. RADAR OPERATION 2-122.10.2 Measuring range by cursor Operate the trackball to place the cursor intersection on the inside edge of the radar tar

2. RADAR OPERATION 2-132.10.3 Measuring range by VRM 1. Press the [EBL/VRM] key to display the EBL/VRM soft keys. EBLVRMEBL1 ONVRM2 ON359.9 ˚

iii TABLE OF CONTENTS FOREWORD ...ix SYSTEM CONF

2. RADAR OPERATION 2-142.10.4 Erasing a VRM, VRM indication Press appropriate VRM soft key, then press the [CLEAR] key. The VRM is erased and its

2. RADAR OPERATION 2-15EBLVRMEBL1 ONVRM2 ON359.9 ˚R 11.70nm+EBL1(Dotted line)EBL2(Dashed line)EBL2 bearingActive marker is highlighted.EBL1 bea

2. RADAR OPERATION 2-162.12 Erasing the Heading Line, North Marker The heading line indicates the ship's heading in all presentation modes. I

2. RADAR OPERATION 2-172.14 Rejecting Radar Interference Radar interference may occur when near another shipborne radar that is operating in the s

2. RADAR OPERATION 2-182.15 Zoom The zoom feature allows you to double the size of the area selected with the “zoom circle.” It is available on any

2. RADAR OPERATION 2-194. Press the ARP TGT ZM soft key. ▲▼1SELECT TARGET NO. Target no. selection window 5. Use the [ENTER] knob to select number

2. RADAR OPERATION 2-202.16.2 Automatic shift The amount of automatic shift is calculated according to ship’s speed, and the amount of shift is lim

2. RADAR OPERATION 2-212.17 Using the Offset EBL The offset EBL can be used to predict a potential collision course. It can also be used to measur

2. RADAR OPERATION 2-222.17.2 Measuring range & bearing between two targets The procedure which follows shows how to measure the range and bea

2. RADAR OPERATION 2-232.18 Echo Trails Echo trails are simulated afterglow of target echoes that represent their movements relative or true to own

iv 2.9 Presentation Mode... 2-8 2.9.1 Selectin

2. RADAR OPERATION 2-242.18.2 Starting echo trails 1. If not displayed, press the [HIDE/SHOW] key to show the radar soft keys. 2. Press the TA

2. RADAR OPERATION 2-252.18.4 Trail color Trails may be shown target trails in blue, yellow, green or white. 1. If not displayed, press the [HID

2. RADAR OPERATION 2-262.19 Echo Stretch Normally, the reflected echoes from long range targets appear on the display as weaker and smaller blips e

2. RADAR OPERATION 2-272.20 Echo Averaging The echo average feature, which requires a Model 1800/1900 series network radar, effectively suppresses

2. RADAR OPERATION 2-282.21 Outputting TLL Data Target position data can be output to units of the network and shown on their plotter screen with

2. RADAR OPERATION 2-292.22 Guard Alarm The guard alarm allows the operator to set the desired range and bearing for a guard zone. When ships, isla

2. RADAR OPERATION 2-30 The equipment then searches for targets inside the guard zone to determine guard alarm type. If a target is found inside th

2. RADAR OPERATION 2-312.23 Watchman 2.23.1 How watchman works The watchman function periodically transmits radar pulses for one minute to check f

2. RADAR OPERATION 2-322.24 Suppressing Second-trace Echoes In certain situations, echoes from very distance targets may appear as false echoes (se

2. RADAR OPERATION 2-332.25 Waypoint Marker A waypoint marker, showing the location of the destination waypoint set on the plotter, may be inscribe

v2.24 Suppressing Second-trace Echoes ...2-32 2.25 Waypoint Marker...

2. RADAR OPERATION 2-342.26 ARP, TTM Operation When the radar source is an ARP-equipped Model 1800/1900 series network radar, you can manually and

2. RADAR OPERATION 2-35 2.26.1 Activating/deactivating ARP, TTM 1. Press the [MENU] key followed by the ARP SETUP soft key to show the ARP SETUP m

2. RADAR OPERATION 2-36 2.26.2 Acquiring and tracking targets (ARP) Ten targets may be acquired and tracked manually and automatically. When you a

2. RADAR OPERATION 2-376. Press the [MENU] key to close the menu. An acquisition area of 2.0 to 2.5 miles in range and ±45º on either side of the

2. RADAR OPERATION 2-382.26.4 Terminating tracking of ARP targets When ten targets have been acquired, no more acquisition occurs unless targets a

2. RADAR OPERATION 2-392.26.5 Setting vector attributes (ARP) What is a vector? A vector is a line extending from a tracked target which shows est

2. RADAR OPERATION 2-402.26.6 Displaying past position (ARP) This ARP can display time-spaced dots (maximum ten dots) marking the past positions o

2. RADAR OPERATION 2-412.26.7 ARP, TTM target data You can show motion trends (range, bearing, course, speed, CPA and TCPA) for ARP or TTM targets

2. RADAR OPERATION 2-422.26.8 CPA/TCPA alarm (ARP) When the predicted CPA of any target becomes smaller than a preset CPA alarm range or its predi

2. RADAR OPERATION 2-43 TCPA▲▼30 seconds1 minute2 minutes3 minutes4 minutes5 minutes6 minutes12 minutes TCPA window 8. Select a TCPA limi

vi 3.8.1 Entering waypoints... 3-28 3.8.2 Editing waypoint d

2. RADAR OPERATION 2-442.27 Interpreting the Radar Display 2.27.1 General Minimum and maximum ranges Minimum range The minimum range is defined by

2. RADAR OPERATION 2-45Radar resolution There are two important factors in radar resolution (discrimination): bearing resolution and range resoluti

2. RADAR OPERATION 2-462.27.2 False echoes Occasionally echo signals appear on the screen at positions where there is no target or disappear even i

2. RADAR OPERATION 2-47Virtual image A relatively large target close to your ship may show at two positions on the screen. One of them is the true

2. RADAR OPERATION 2-482.27.3 SART (Search and Rescue Transponder) A Search and Rescue Transponder (SART) may be triggered by any X-Band (3 cm) ra

2. RADAR OPERATION 2-49General procedure for detecting SART response 1. Use the range scale of 6 or 12 nm as the spacing between the SART response

2. RADAR OPERATION 2-50A/C SEA control For optimum range SART detection, this control should be set to the minimum. Care should be exercised as wan

3-13. PLOTTER OPERATION 3.1 Plotter Displays You may show the plotter display over the entire screen, in the overlay screen with the radar display,

3. PLOTTER OPERATION 3-2Nav data window The data shown in the nav data window depends on the status of the NAV soft key and the cursor. 359. 9°M

3. PLOTTER OPERATION 3-33.1.2 Compass display The compass display, shown in combination displays, provides steering information. The compass rose s

vii4.10 Picture Advance Speed...4-17 4.10.1 Advancement inde

3. PLOTTER OPERATION 3-4Reading the XTE (cross-track error) monitor The XTE monitor, located below the compass rose, shows the distance you are off

3. PLOTTER OPERATION 3-53.1.3 Highway display The highway display, shown in combination displays, provides a graphic presentation of ship’s track a

3. PLOTTER OPERATION 3-63.1.4 Nav data display The nav data display provides comprehensive navigation data, and it is shown in a three-screen comb

3. PLOTTER OPERATION 3-73.2 Presentation Mode Three types of presentation modes are provided for the plotter display: north-up, course-up and auto

3. PLOTTER OPERATION 3-83.2.2 Course-up The course-up mode is useful for monitoring ship’s progress towards a waypoint. The destination is at the t

3. PLOTTER OPERATION 3-93.3 Shifting the Display The plotter display can be shifted as below. 1. Use the trackball to locate the cursor at a scr

3. PLOTTER OPERATION 3-103.5 Chart Cards 3.5.1 Chart card overview Your system reads FURUNO and NavCharts™ (NAVIONICS) charts, or C-MAP charts, de

3. PLOTTER OPERATION 3-113.5.2 Indices and chart enlargement When the [RANGE] key is operated, you will see several frames appear on the chart. Th

3. PLOTTER OPERATION 3-123.5.3 FURUNO and NavCharts™ charts Chart symbols The table below shows FURUNO and NavCharts™ chart symbols and their mean

3. PLOTTER OPERATION 3-13Port service icons Selected NavCharts show services available at ports, with icons. 1. Use the trackball to place the cu