Furuno CH-250 Manuel d'utilisateur télécharger pdf (Page 58)

3-8

3.9 Event Marker

The event marker functions to mark important locations on the screen, and five event markers

may be inscribed. Each time the [EVENT] key is pressed the “latest event marker” (

⊕) is

inscribed at the cursor location and all previously entered event markers are shown by the

“previous event marker” (+). When the capacity for event markers is reached the eldest event

marker is erased from the screen to make room for the latest.

Note 1: Event marker position can be output to external equipment and marked on the display

of the external equipment. Each press of the [EVENT] key outputs event marker

position. For details see TARGET L/L on page 5-11.

Note 2: Event markers cannot be inscribed from the vertical fan display when it is in the sub

window (Horizontal/vertical fan display). Inscribe the marker from the horizontal display

to show it in the vertical fan display.

3. Operate the Omnipad to place the cursor on the location desired for an event marker.

4. Press the [EVENT] key to inscribe the event marker. The event marker is inscribed on the

vertical fan display, as well as the horizontal and video plotter displays.

NAV

DATA

"Latest event marker"

"Previous event

marker"

To delete all event markers,

place cursor outside

display area and press the

[MENU] key.

Display area

Figure 3-11 How to inscribe, delete the event markers

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 117 118

Pas de commentaire

Furuno CH-250 Manuel d'utilisateur Page 58