Furuno 1942 MARK-2 Manuel d'utilisateur télécharger pdf (Page 21)

3-1

3.2 Selecting the Presentation

Mode

With heading sensor connection, this radar

provides four presentation modes: head-up,

course-up, north-up and true motion.

1. Press the [MENU] key.

2. Operate the omnipad to select “MODE.”

3. Press the [ACQ/ENTER] key.

The display and the display mode indication

at the top left-hand corner of the display

change in the sequence of HU (heading up),

CU (course up), NU (north up) and TM (true

motion) when the [ACQ/ENTER] key is

pressed. If there is no heading sensor con-

nection, the display mode is always HU.

4. Press the [MENU] key to close the menu.

Note: The radar begins operation with last

selected display mode (except course up)

whenever the unit is turned on. Note how-

ever that head up is selected when course

up was the last used mode.

Head up

The picture is oriented so the heading marker

is at the top of the display. This mode is use-

ful for navigation in congested waters.

Course up

The course up mode shows ship’ s heading

by the heading marker, at the top of the dis-

play. To get heading desired, steer vessel in

direction desired, and then show “CU” at the

top left-hand corner of the display.

3.1 Basic Menu Operation

The menu mostly contains less-often used

functions which once preset do not require

regular adjustment. To open or close the

menu, press the [MENU] key. You can select

items and options from the menu with the

omnipad. The complete menu appears on

page v.

1. Press the [MENU] key to display the main

menu.

SSel by omnipad & press ENT.S

RINGS

EBL

OFFSET

SHIFT

ZOOM

MODE

DISP

DATA

ECHO

TRAIL

ECHO

STRTCH

ARP-10

MENU

OTHER

MENU

Change brill

from 3 to max.

Figure 3-1 Main menu

2. Press the omnipad to select item. For

example, select RINGS. A message ap-

pears at the bottom of the menu window.

3. Press the [ACQ/ENTER] key to select set-

ting. Each time this key is pressed,

the message changes. For the RINGS

menu, the message sequence is as

shown below.

Change brill from Off to 1.

Change brill from 1 to 2.

Change brill from 2 to 3.

Change brill from 3 to max.

Change brill from max to Off.

Figure 3-2 Messages for RINGS menu

4. Press the [MENU] key to close the menu.

3. MENU OPERATION

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Commentaires sur ces manuels

Pas de commentaire